This is a jewelry frame display where you can hang all your earrings! So if you want to find out how to make this then keep on reading!
What you'll need:
- 8x10 picture frame
- 3ft of picture wire
- Acrylic paint and brush
- Staple gun (or nails/tacks, ect.)
Everything above is what you'll need to make your own jewelry frame display!
1. Start by giving your frame a few coats of acrylic paint. I painted my frame with 3 coats, allowing the paint to dry 5 min, in between each coat. A black picture frame was used to give the finished display a distressed look. After your frame is painted, allow it to dry for 24 hours.
2. In this next step, you'll need the picture frame wire. Cut 3 strands each measuring 12 inches.
3. Attach the first wire 1 inch from the top of your frame, the 2nd wire 2 inches from your first wire, and the 3rd wire 2 inches from your second wire, make sure you leave about 1.5 inches of extra wire on each end, so you can wrap it over and under to secure your wire. Watch your fingers and start stapling!
4. This next step is only necessary if you don't get your staples down all the way, use a hammer to secure it everything.
And then your done and you have a beautiful display to show off all your jewelry or earrings!
No comments:
Post a Comment